Mopec Maestro MB1000 Series, Инструкция по установке, обслуживанию и эксплуатации

Страница: 36 / 60

Installation Service User Manual Maestro series MB1000-MAN rev.1 36
 The PathCam system is available factory installed and as an accessory on existing stations. The camera itself is
mounted to the back side of the plate and only the lens protrudes out of the canopy.
Other manufactured system protrude further down out of the canopy in order to maintain their
recommended fixed focal distance from the cutting board.
 Traditional Camera Stands, like the AX074 Accessory shown above, are available for mounting handheld point
and shoot type cameras.
 PathCam Camera Systems are covered in their own product specification and user manual.
See
www.mopec.com for the latest information.
6.2.15 BMS (Building Management System) Connection
Mopec BMS (Building Management System) connection, option MB1022, is a simple output signal intended to be
connected to a hospital remote management system. The function is a dry contact relay output that is triggered by an
alert condition on the Maestro.

This signal informs the hospital’s management system that the station has an alert condition.

The BMS signal wires are coiled up and located on the top of the hood in a cutout on the same side of the unit
as the touch screen(sink side). Pull the wires out, trim them to the desired length, and connect them to your
BMS signal wires from the facility.