Mopec Maestro MB1000 Series, Инструкция по установке, обслуживанию и эксплуатации

Страница: 33 / 60

Installation Service User Manual Maestro series MB1000-MAN rev.1 33
6.2.10 Hand Spray Option
The hand spray option is installed opposite the sink and intended to spray down the grid plate and cutting board
surfaces.

Hand spray option comes with a hot/cold mixing valve that must be rotated up and on for it to work.

Simply squeeze the hand spray trigger to spray mixed water. Flow rate can be adjusted by both the trigger and
the mixing valve.
6.2.11 End Rinse Option
The End Rinse option is installed opposite the sink and utilizes the hand spray hot/cold mixing valve but has a separate
flow control valve.

Adjust the hot/cold Mixing Valve to the desired mixture. It is recommended to open the mixing valve up all the
way. Flow can be adjusted separately at both the hand spray and end rinse control knob.
 Adjust the End Rinse Control Knob to the desired flow.
 Use the Mixing valve lever to turn the end rinse on and off.