Mopec Maestro MB1000 Series, Инструкция по установке, обслуживанию и эксплуатации

Страница: 30 / 60

Installation Service User Manual Maestro series MB1000-MAN rev.1 30
 If you wave your hand near the sensor the IR sensor the system will turn on the water solenoid to the faucet.
 Mixed water is still controlled by the hot/cold mixing lever and it must be rotated up and on in order for water
to flow.
 The water will flow for the amount of time set on the Water Timer function mentioned in 6.2.5.
6.2.6 Water Timer Option
The water timer is used in conjunction with the foot pedal option or IR option. It controls the amount of ON time of the
water solenoid after the first tap of the foot pedal. This can be set as a safety timeout or it can be used to dispense a
given amount of water per a laboratory process.

To adjust water ON time touch the Water Timer button.

Adjust the time ON setting with the up down arrows.

The water will turn on with one tap of the Foot Pedal and turn off at the set time.
6.2.7 Air Flow Meter (standard)
The Air Flow Meter is integrated into the Maestro hood to provide a method to alarm if airflow in the facility has been
impeded or adjusted out of a given range. This setting is only intended to provide an alert.
Most Grossing stations are tested and calibrated for Air Flow by a local HVAC provider annually. This is a
perfect time to adjust the Air Flow Meter setting against a calibrated setpoint.
 Touch the
Setup
button and enter into Lab Manager access with passcode “
1 2 3 4
“.
 On the
Configure
screen, locate the Air Flow Differential Pressure box.