Mopec Maestro MB1000 Series, Инструкция по установке, обслуживанию и эксплуатации

Страница: 34 / 60

Installation Service User Manual Maestro series MB1000-MAN rev.1 34
6.2.12 Formalin Dispensing Option
The Formalin Dispense system on a Maestro utilizes a syphon hose and a transfer pump to fill up a reservoir tank located
in the hood of the unit. This enables a very controllable gravity fed dispense from a simple lever pull on the spigot.

The Syphon Hose is intended to be connected to your formalin supply container (cut factory zip tie to uncoil
hose). Most cubitainers utilize a quick disconnect. Insert the connector and pull to make sure its latched.
o If you are pumping from a formalin barrel remove the supplied quick disconnect fitting and directly
insert the end of the syphon hose into barrel. Watch for bag liners, do not suck them up in the hose.
 To start pumping simply hold down the green Dispense Pump button located just inside the knee panel. The
system is equipped with level sensors and will turn off the pump when full.
o An empty system will typically transfer 5 gallons when filling.
 The Status icons will alert you to low levels and change to green status when full.
 To dispense pull the spigot handle. The spigot also has a flow control on the side. Adjust this to your desired
flowrate. With a gravity fed system the flow will be the fastest when full and the slowest when empty.
6.2.13 Formalin Collection Option
The Formalin Collection system is also a gravity system that drains from the collection funnel down to a carboy located
on a dolly in the knee space. This will be behind the cabinet doors if your Maestro has that option.
 Pour off formalin waste into the collection funnel, located in the back corner of the sink.
The funnel is necked down to help prevent solids from plugging the collection line. If desired Mopec
does offer screens ( BA077 ) for the funnel to help collect solids.
BA077