Moore Industries NET Concentrator System AOM, Руководство пользователя

Страница: 19 / 103

NET Concentrator System
®
NCS
- 19 -
Moore Industries-International, Inc. www.miinet.com
Process Data
To monitor process data, click “Monitor Process Data”
from the device tree or the main Interface
Module screen. The screen in Configuration Figure 3
(below) appears. Screen setup is detailed below.
Monitor Process Data
Check this box in order to monitor a system‘s process
variables and status.
Update Rate (seconds)
The dropdown menu allows you to select how often
your screen is updated.
Data Precision (digits right of decimal)
Choose the amount of resolution you want in the
displayed data by selecting the value from the
dropdown menu.
Status
Indicates the present status of your system.
Last Update
Indicates the last time that information was posted and
updated to your screen.
Configuration Figure 3.
Process Data Screen
Navigating the PC Program
The following information applies to all modules
connected to the Interface Module. It details
instructions for maneuvering through the configuration
program.
Channel Selection
There are various methods for selecting a device
channel for configuration, you may use any of the
following:
- Open the module itself in the device tree by
clicking the “+”.
- In the device tree, double-click the desired
device to open it up and expose the channels.
- Highlight the module itself in the device tree.
In the right-hand pane, buttons will appear for
each channel in the selected module. Select
the channel you wish to configure.
Note:
After configuring the channel for trimming or custom
curve, be sure to download the channel item itself to
properly enable the feature.
Settings
When enabling Trimming or Custom Curve settings in
a channel, check the appropriate box in the right-hand
pane. Open the channel from the device tree and
then open the enabled setting. Proceed in configuring
the parameter.