manualshive.com logo in svg

MONTAGUE Legend RD18, Инструкция по эксплуатации

Поделиться
Скачать
MONTAGUE Legend RD18 Скачать руководство пользователя страница 2

46

INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE USER SMELLS GAS MUST BE POSTED
IN A PROMINENT LOCATION. THIS INFORMATION MAY BE OBTAINED BY CONSULTING
THE LOCAL GAS SUPPLIER.

SHIPPING DAMAGE CLAIM PROCEDURE

For your protection, please note that equipment in this shipment was carefully inspected and packed
by skilled personnel before leaving the factory. The transportation company assumed full
responsibility for safe delivery upon acceptance of this shipment.

If shipment arrives damaged:

1. VISIBLE LOSS OR DAMAGE - Be certain this is noted on freight bill or express receipt, and

signed by person making delivery.

2. FILE CLAIM FOR DAMAGES IMMEDIATLY - Regardless of the extent of damage.

3. CONCEALED LOSS OR DAMAGE - If damage is unnoticed until merchandise is unpacked,

notify transportation company or carrier immediately, and file "concealed damage" claim with
them. This should be done within fifteen (15) days of date that delivery was made to you. Be
sure to retain container for inspection.

We cannot assume responsibility for damage incurred in transit. We will, however, be glad to furnish
you with necessary documents to support your claim.

FOR YOUR  SAFETY:

Do not store or use gasoline
or other flammable vapors
and liquids in the vicinity of
this or any other appliance.

WARNING:

Improper installation, adjustment,
alteration, service or maintenance
can cause property damage,
injury or death. Read the
operating and
maintenance instructions
thoroughly before installing or
servicing this equipment.

IMPORTANT

CONTENTS

INSTALLATION   . . . . . . . . . . . . . 1

MAINTENANCE . . . . . . . . . . . . . .16

OPERATION  . . . . . . . . . . . . . . . .14

SERVICE . . . . . . . . . . . . . . . . . . . 23

Содержание Legend RD18















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды