MONTAGUE Legend RD18, Инструкция по эксплуатации

Страница: 15 / 46

13
INSTALLATION
4. To melt solid shortening without scorching, the burner should be turned ON for about three
seconds and OFF for about 10 seconds; alternate until melted. If any smoke is seen during this
process, the oil is heating too quickly and scorching. This melting process is not necessary
with liquid shortening.
Shutting the Fryer Down
For short-term shut down during the workday, place the fryer’s gas valve in the Pilot position
and put the frypot covers in place (if the fryer is so equipped).
When shutting the fryers down at closing time, place the fryer power switch in the OFF posi-
tion, place the gas valve in the OFF position, and put the frypot covers in place (if the fryer is so
equipped).
Thermostats
The centerline thermostat on a RF40 is connected to a temperature knob. On the standard
model, the knob is attached directly to the thermostat (see photo above). Rotating the knob to
the desired cooking temperature (setpoint) directly adjusts the thermostat control to that tem-
perature.
The Thermostat Controller requires no programming, but it may require calibration from time to
time. To determine if it requires calibration, refer to Check Thermostat Controller Thermostat
Calibration.