Monessen Hearth KSTDV500 Скачать руководство пользователя | Manualshive

Страница: 51 / 52

background image

73D4125

51

KSTDV Series Gas Fireplace

lIMITeD lIFeTIMe warranTy polIcy

lIFeTIMe warranTy

The following components are warranted for life to the original owner, subject to proof of purchase: Firebox, Com-
bustion Chamber, Heat Exchanger, Grate and Stainless Steel Burners.

FIVe year warranTy

The following components are warranted five (5) years to the original owner, subject of proof of purchase: Ceramic
Fiber Logs.

BaSIc warranTy

MHSC warrants the components and materials in your gas appliance to be free from manufacturing and material
defects for a period of two years from date of installation. After installation, if any of the components manufactured
by MHSC in the appliance are found to be defective in materials or workmanship, MHSC will, at its option, replace
or repair the defective components at no charge to the original owner. MHSC will also pay for reasonable labor costs
incurred in replacing or repairing such components for a period of two years from date of installation. Any products
presented for warranty repair must be accompanied by a dated proof of purchase.
This Limited Lifetime Warranty will be void if the appliance in not installed by a qualified installer in accordance
with the installation instructions. The Limited Lifetime Warranty will also be void if the appliance is not operated
and maintained according to the operating instructions supplied with the appliance, and does not extend to (1)
firebox/burner assembly damage by accident, neglect, misuse, abuse, alterations, negligence of others, including
the installation thereof by unqualified installers, (2) the costs of removal, reinstallation or transportation of defec-
tive parts on the appliance, or (3) incidental or consequential damage. All service work must be performed by an
authorized service representative.
This warranty is expressly in lieu of other warranties, express or implied, including the warranty of merchantability
of fitness for purpose and of all other obligations or liabilities. MHSC does not assume for it any other obligations
or liabilities in connection with sale or use of the appliance. It states that do not allow limitations on how long an
implied warranty lasts, or do not allow exclusion of indirect damage, those limitations of exclusions may not apply
to you. You may also have additional rights not covered in the Limited Lifetime Warranty.
MHSC reserves the right to investigate any and all the claims against the Limited Lifetime Warranty and decide
upon method of settlement.

IF warranTy SerVIce IS neeDeD...

1. Contact your supplier. Make sure you have your warranty, your sales receipt and the model/serial number of

your MHSC product.

2. DO NOT ATTEMPT TO DO ANY SERVICE WORK YOURSELF.

«
...
49
50
51
52
»

Содержание KSTDV500





















































Отзывы:

Нет отзывов

Похожие инструкции для KSTDV500

Бренд: EarthCore Страницы: 44

Ofiretable43-BK

Бренд: Ohana Страницы: 22

Бренд: Palazzetti Страницы: 36

Бренд: Procom Страницы: 26

Inglenook IWZC-02

Бренд: Country Flame Страницы: 54

Бренд: FocalPoint Страницы: 5

Бренд: Heat-N-Glo Страницы: 27

Бренд: Heat & Glo Страницы: 36

Direct Vent Gas Fireplace

Бренд: Element4 Страницы: 92

Бренд: Travis Industries Страницы: 3

Brann table corten

Бренд: Forno Страницы: 6

Denali DENBR-1242

Бренд: Outdoor GreatRoom Company Страницы: 12

Бренд: Enviro Страницы: 41

Бренд: GlammFire Страницы: 12

HeatFlo Kit HTFLO-LIN60

Бренд: IHP Страницы: 8

Бренд: HAMPTON BAY Страницы: 9

Бренд: HAMPTON BAY Страницы: 9

Бренд: UrbanFire Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды