Monessen Hearth KSTDV500, Инструкция по установке и эксплуатации

Страница: 33 / 52

73D4125
33
KSTDV Series Gas Fireplace GlaSS reMoVal
GlaSS FraMe reMoVal
1. Remove the plate located in front of the glass at the
bottom.
2. Remove rod provided for screen assembly located
beneath the cover plate.
3. Rotate the access doors on the right and left side of the
glass toward the glass.
4. Remove glass frame by releasing the three latches
located at the top of the firebox. Tilt glass away from the
unit, lift glass frame up and away from the unit.
Figure
42
c
a
u
T
Io
n
each clamp has a quick spring force. when
reinstalling clamps, keep fingers clear.
FP2549
glass frame removal
Figure 42 -
Remove Glass Frame
Glass
Frame
FP2549
lIGhT & BrIcK InSTallaTIon
1. Remove glass frames from fireplace.
2. Remove the six (6) screws securing each light box and
remove from unit. Figure 43
3. The light bulbs are included in the Homeowner's Manual
packet. Install the light bulbs into bulb sockets as shown
in
Figure 43 . cauTIon: Finger prints or the transfer of
oil from hands will reduce the lifespan of the bulbs. It is
advisable to handle the light bulbs with a clean cloth.
4. The light lenses are included in the Homeowner's
Manual packet. Remove the lens retainer brackets and
install the light lenses into the light box covers as shown
in
Figure 44 .
FP2590
remove light box cover
Bulb Socket
Light Bulb
Light Box
Cover
Brick Retainer Tab
FP2590
Figure 43 -
Remove Light Box Cover
noTe: The brick kit will be installed before reinstalling the
light box cover.
5. Install the four (4) hearth brick pieces on each side of
the unit, in front of the front burners.
6. Place the floor brick panels on the brick supports
between the hearth bricks.
7. Place the wall brick panels against the firebox walls,
setting on the floor and hearth bricks. The wall brick will
be held in place by the brick retainer tab on the light box
cover.
Figures 43 & 45
8. The brick retainer tab can be bent to a different angle to
hold the wall brick panels in place more firmly if neces-
sary.
FP2591
install light lense
Lens
Lens Retainer
Bracket
Light Box Cover
FP2591
Figure 44 -
Remove Lens Retainer
Bracket