Monacor TXA-700USB Скачать руководство пользователя страница 8

Страница: 8 / 34

Portable Amplifier System

These operating instructions are intended
for users of the amplifier system (e. g. DJs,
speakers at public or private events, etc.)
and do not require any specific technical
knowledge. Please read these operating
instructions carefully prior to operating the
unit and keep them for later reference. All
operating elements and connections de

scribed can be found on the fold-out page 3.

1 Operating Elements

and Connections

1.1 Wireless microphone (figs. 1/ 2)

with sleeve screwed off

1 IR sensor

2 Battery compartment

3 Power indicator

green = batteries sufficiently charged
red = batteries almost discharged

4 Power switch

5 Control (adjustable by means of a

screwdriver) to readjust the volume
level

6 Switch for the transmission power

H = high, L = low

1.2 Active speaker system (fig. 3)

Wireless receiver

7 Receiving antenna

8 Display: indicates the transmission

channel

9 Red LED RF: indicates radio reception

green LED AF for the audio signal
received: will light up when a specific
signal level has been reached

10 Button to set the wireless microphone

to the same transmission channel by
means of an infrared signal:

chapter 7.1, step 4

11 IR transmission diode

12 Buttons to set the transmission channel

13 Control (adjustable by means of a

screwdriver) to adjust the threshold
value for the squelch function:

chapter 7.1, step 8

14 Power switch and volume control

MP3 player / Bluetooth receiver

Note: Due to the large number of storage device
manufacturers and device drivers, it cannot be
guaranteed that all storage media are compatible
with this player.

With the player, MP3 files from SD/ SDHC
memory cards and USB storage media
(USB flash drive or USB hard disk with sep-
arate power supply) can be replayed. The
player also supports the reproduction of
WMA files and WAV files. When a storage
medium is connected, the player will switch
to this medium and start the replay.

To establish a Bluetooth connection:
1. Press the button MODE (19) [twice, if

applicable] to switch to the mode “Blue-
tooth”. “BT NOT LINK” will appear on the
display (18) to indicate that no Bluetooth
connection has been established.

2. At the Bluetooth source (e.g. smart-

phone), switch on the Bluetooth func-
tion. On the display of the source, the
Bluetooth receiver will be indicated as
“Bluetooth”. Pair the source with the
Bluetooth receiver (please refer to the
instruction manual of the source, if
required). Once the pairing has been
made, the name of the source will
appear on the display (18).

Please refer to items 18 and 19 for infor-
mation with regard to the display indica-
tions and operating options.

15 Memory card slot: Insert the card into

the slot (notched corner upwards and
facing the unit).

16 IR sensor for the signals of the remote

control

17 Port for the USB storage device

18 Display

shows in the mode “USB” or “memory card”:

a) the symbol

(replay),

(pause) or

(stop)

b) the replay mode:

* Replay sequence: first all titles without folder in the

root directory (compiled by the player in a folder), then
the first folder of the root directory with its subfolders,
then the next folder with its subfolders, etc.

c) the number of the title

and below, the total number of titles

d) the equalizer setting:

NOR (Normal), POP, ROCK, JAZZ,
CLAS (Classic), COU (Country), BAS
(LowBass)

e) the file format and the bit rate (kbps)

f) the symbol for the storage medium

(USB flash drive or memory card)

g) the time already played of the title, fol-

lowed by its total playing time

h) the file name (scrolling)

shows in the mode “Bluetooth”:

i) the Bluetooth symbol

j) the symbol

(replay),

(pause) or

(when no Bluetooth connection has
been established)

k) the equalizer setting: see d)

l) the time already played

m) when no Bluetooth connection has

been established: “BT NOT LINK”
when a Bluetooth connection has been
established: name of the Bluetooth
source

19 Control buttons
When pressing a button on the remote con-
trol, always point the remote control to the
IR sensor (16). Make sure that there are no
obstacles between the remote control and
the sensor.

* not supported in the Bluetooth mode

The buttons CHANNEL and PICK SONG
on the remote control are without any func-
tion.

Button

At the unit

On the remote

control

Function

MODE

To switch between USB port,
memory card and Bluetooth
receiver

To switch between replay and
pause

To stop the replay*;
when the button

is pressed,