MMP LIFTEM MARK IV, Руководство по эксплуатации

Страница: 42 / 52

M I L L E N N I U M M E D I C A L P R O D U C T S , I N C .
39
LIFTEM® MKIV PERIODIC RETEST DATA SHEET
Serial Number:
Test Date: Test Performed By:
(Indicates expected response)
A. RECORDS REVIEW
1. Periodic recommended Maintenance Records reviewed and any missed items
completed.
(Yes)
B. PHYSICAL CHECKS AND MEASUREMENTS
1. Wipe down LIFTEM, insure that all hardware (nuts, bolts, etc.) is complete and
tight. Inspect for damage.
(Yes)
2. Measure distance from FLOOR to TOP of CHEEK PLATES. (64”+/-1”)
3. Measure distance from FRONT of LEGS to the LIP on the back of the BASE,
LEGS retracted.
(49”+/-1/2”)
4. Measure distance from TOP of the MAST to CHEEK PLATE upper mounting
BOLT CENTER LINE
(11/16"+/-1/8")
5. Measure distance from CENTER to CENTER WIDTH between REAR CASTER
mounting BOLTS.
(21”+/-1/2”)
6. Required DECALS and TAGS are in place and LEGIBLE. (Yes)
•
Laminated “LIFTEM®” Key Operation Points” TAG on HANDLE BAR
(Yes)
•
Hanging STOP SIGN on CHEEK PLATE
(Yes)
•
DECAL / LABEL Installation:
(Yes)
•
Product/Company Name & Serial No.
(Yes)
•
HAND CONTROLLER – Push Button Functions
(Yes)
•
CHEEK PLATE & LEGS – Yes and No Operating Points
(Yes)
•
LIFT POINTS - □ 600 Pound / □ 700 Pound
(Yes)
•
Maximum Capacity - □ 700 Pound
(Yes)
•
Product Name - LIFTEM®
(Yes)
•
DO NOT Push or Pull Lift with Patient Suspended (4 PLACES)
(Yes)
•
POWER CORD – Use only to:
(Yes)
•
When Relocating Lifting Bar
(Yes)
•
PINCH POINT Warning
(Yes)
•
Operate on LEVEL SURFACE
(Yes)
•
“Manufactured” (Date followed by E or M)
(Yes)
C. OPERATIONAL TEST
1. Setup LIFTEM to operate (Yes)
2. Lock REAR CASTERS. Using HANDSET; Extend LEGS fully (Yes)
3. Measure distance from FRONT END of LEGS to BACK of BASE Lip with LEGS
fully extended and not spread.
(69 ½”+/-1/2”)
4. Using HANDSET; Spread LEGS fully. (Yes)
5. Measure CENTER to CENTER WIDTH between FRONT CASTER Mounting
BOLTS.
(80”+/-1”)
6. Position the BOOM in the CENTER and Lower the BOOM until it stops. (Yes)