MMP LIFTEM MARK IV, Руководство по эксплуатации

Страница: 39 / 52

M I L L E N N I U M M E D I C A L P R O D U C T S , I N C .
36
CHAPTER 7
MAINTENANCE PROCEDURES
Perform the following service and maintenance procedures on a regularly scheduled basis to keep LIFTEM
functioning at optimum performance for as long as possible.
Remove power from unit before performing any maintenance operations except charging the BATTERY.
Weekly Service and Maintenance
On a weekly basis, or at more appropriate intervals considering usage and storage environments, clean
any dust and dirt off the LIFTEM by wiping surfaces with a damp cloth moistened with lukewarm
water.
Monthly Service and Maintenance
On a monthly basis, or at more appropriate intervals considering usage, perform the following LIFTEM
Monthly Operation Verification Procedure.
a) Objective:
The objective of this procedure is to verify the integrity of LIFTEM on a monthly basis.
b) General:
The Verification Procedure consists of:
● RECORDS REVIEW
● PHYSICAL CHECKS AND MEASUREMENTS
● OPERATIONAL TEST
● SAFETY SOFTWARE VERIFICATION
Data Sheets are provided on pages 39 and 40 to record the results of this procedure. These sheets should
be completed and filed for reference during subsequent checks.
c) Records Review:
Review the Lift Maintenance Records and verify that the periodic maintenance procedures specified
in Chapter 7 of the Operations Manual have been satisfactorily performed. Perform and/or complete
any overdue procedures.
d) Physical Checks And Measurements:
The purpose of these Checks and Measurements is to insure that LIFTEM has not been damaged or
that the position or location of any key parts has not shifted or been damaged. Record all results on
the Data Sheet.
1)
Wipe down LIFTEM using a damp cloth and lukewarm water and insure that all hardware (nuts,
bolts, etc.) is complete and tight. Inspect for damage.
2) Measure distance from FLOOR to TOP of CHEEK PLATES.
3) Measure distance from FRONT of LEGS to the LIP on the back of the BASE, with LEGS