MMP LIFTEM MARK IV, Руководство по эксплуатации

Страница: 13 / 52

M I L L E N N I U M M E D I C A L P R O D U C T S , I N C .
10
•
Rotate the MAST/BOOM to the center position by pressing
the BOOM ROTATE button. As viewed from the front of the
lift, if the BOOM is to the left side press the RIGHT button
and if it is to the right side press the LEFT button. The BOOM
will automatically stop at the center position.
•
Retract both LEGS by pressing the LEG EXTEND - IN
button.
•
Close both LEGS by pressing the LEG SPREAD - CLOSE button.
•
If the RECEIVER is in the way, unlock the rear wheel casters by
releasing the lock tabs on both casters and move the lift away from
the RECEIVER. Do so by pressing on the unlocking tab on the wheel brake using
your foot.
•
Move LIFTEM out of the way of the gurney or wheelchair.
•
With LIFTEM away from the patient, return the BOOM to its lowest position by
pressing the BOOM LIFT - DOWN button and return LIFTEM to its designated
storage area.
•
Charge the BATTERY by plugging the 115 Volt AC Power cord into a wall
socket.
Safety Precautions:
1) Insure that LIFTING BAR remains clear of patient while lowering.
2) Keep hands free of BASE while closing and retracting LEGS.
3. Lift and Transfer Back to Bed
a) Positioning Patient and LIFTEM
The procedure to return the patient to the bed from the device in which the patient
resides is the opposite from section 2 (
Lift and Transfer from Bed ). The first step is
to position the patient by the bed such as follows:
•
Place the wheelchair or commode by the bed.
•
Retrieve LIFTEM from the storage area and position by
the bed and patient. Prior to properly setting up
LIFTEM, position the appropriate sling under the
patient.
FRONT
Wheelchair