MMP LIFTEM MARK IV, Руководство по эксплуатации

Страница: 16 / 52

M I L L E N N I U M M E D I C A L P R O D U C T S , I N C .
13
c) Transferring to Bed
•
Lower the patient to the bed by pressing the BOOM LIFT - DOWN button on the
HANDSET.
•
Once positioned on the bed remove the SLING from the LIFTING BAR
ATTACHMENT POINTS.
•
Lift the BOOM to its highest position, by pressing the BOOM/MAST - UP
button.
•
Remove the SLING.
•
For a regular SLING roll the patient to one side and remove the SLING from
underneath the patient.
Safety Precautions:
1) While lowering insure that patient’s limbs remain clear of bed frame.
2) Insure that LIFTING BAR remains clear of patient while removing SLING.
3) Insure that any catheters or cables attached to patient do not become
entangled in the LIFTEM or the receiving device.
4) When rotating the BOOM from left to right, or reverse, with a patient
suspended from the LIFT POINT always jog (rapidly press and release) the
HANDSET to reduce tendency for patient to sway during
rotation.
d) After Patient Transfer Completed
•
Move the MAST/BOOM to the center position by pressing the
appropriate BOOM ROTATE - RIGHT or LEFT button.
•
Retract the LEGS of LIFTEM by pressing the LEG EXTEND
- IN button. Close the LEGS by pressing the LEG SPREAD -
CLOSE button.
Note: Unless the BOOM is in the center position, it is not possible to retract
or close the LEGS.
•
Unlock REAR WHEEL CASTERS by depressing the rear wheel caster lock tabs.
•
Move LIFTEM away from the bed.
•
Move the MAST/BOOM to its lowest position by pressing the BOOM DOWN
button.
•
Remove LIFTEM to its storage area and charge the BATTERY.
Safety Precautions:
1) Insure that LIFTING BAR remains clear of patient while rotating BOOM.
2) Keep hands free of BASE while closing and retracting LEGS.