MMP LIFTEM MARK IV, Руководство по эксплуатации

Страница: 18 / 52

M I L L E N N I U M M E D I C A L P R O D U C T S , I N C .
15
4. Charging a Dead Battery
A 115 Volt AC Power source is required to recharge a dead or partially
discharged BATTERY. To recharge a dead BATTERY the AC
POWER CORD must be plugged into a 115 Volt AC wall socket. It will
take about 8 hours to fully recharge a dead BATTERY. It is
recommended that the power cord be plugged in to recharge the
BATTERY while LIFTEM is in storage. This will assure the user of a
fully charged system ready at all times.
5. Moving LIFTEM
LIFTEM is easily transportable. However it is highly recommended
that the following configuration be used when moving LIFTEM from
one location to another:
•
The LEGS must be completely CLOSED
•
The LEGS must be completely RETRACTED
•
The BOOM must be in its lowest position
•
The MAST/BOOM must be centered between the closed legs
In this configuration, LIFTEM can be pushed or pulled easily using the handles located
on the MAST.
IN NO CASE SHOULD A PATIENT BE ON THE LIFT IN THIS
CONFIGURATION.
6. Assembly & Disassembly of LIFTEM
LIFTEM has been designed for ease of shipping and mobility where elevators are not
available and space is restricted. To accomplish this, LIFTEM can be easily
disassembled into subassemblies. Refer to the Assembly Instruction manual that has
been provided with this device.