6
Vision Sensor Settings
6-37 Work recognition test
6.2.2.
Image adjustment
This section explains how to adjust the brightness and Diaphragm for the image captured by the vision
sensor.
(1) Check the image shot with MELFA-Vision [Camera Image].
From MELFA-Vision menu, click [Sensor] – [Live Mode] or
click
from the tool bar to put MELFA-Vision into live image mode.
Put the work to be recognized under the vision sensor and check the resulting image with
MELFA-Vision [Camera Image].
Figure 6-9 Image Check Example
(2) If the field of vision is not appropriate, adjust the distance between the vision sensor and the
work or replace the lens.
①
When the image is too large
Figure 6-10 Example in Which the Image Is Too Large
②
When the image is too small
Figure 6-11 Example in Which the Image Is Too Small
