Mitsubishi FX3U-ENET, Руководство пользователя

Страница: 106 / 298

5 - 32 5 - 32
MELSEC-F
5 COMMUNICATION PROCEDURE
POINT
This example uses connection number 1 for explanation. Use the corresponding
BFM No. and bits for other connection numbers.
1 Processing when the open processing is abnormally completed (TCP)
When opening from the Ethernet module under a normal situation, if the
Ethernet module sends a SYN, the external device returns an ACK and
a SYN.
However, if the Ethernet module sends a SYN and then the external
device returns a RST, the open abnormal completion (BFM#28 b6) is
immediately turned on and open processing ends.
2 The open status and error code at abnormal end can be confirmed with
the following buffer memory.
• Each connection open abnormal code area of the communication
status storage area
(Connection numbers 1 to 8; BFM#120 to 199)
• Error log area (BFM#227 to 372)
• Error codes stored in the open error code area are cleared when
writing "0001
H
" to the BFM #1602 to 1609 to perform the open
operation.
3 Processing when the close processing is abnormally completed (TCP)
When closing normally from the Ethernet module, the Ethernet module
sends a FIN request and the external device returns an ACK and a FIN.
However, if an ACK and a FIN are not returned because the external
device is faulty, the Ethernet module forcibly disconnects the
connection (sends a RST message).
PLC
Ethernet
module
Ethernet
Open request signal
(CLOSE processing
execution)
Open completion
signal
Close abnormal processing
FIN is not sent after waiting for the TCP
end timer
FIN
ACK
1)
2)
3)
4)
5)
6)
7)
FIN RST
At normal completion