Mitsubishi FX3U-ENET, Руководство пользователя

Страница: 35 / 298

3 - 7 3 - 7
MELSEC-F
3 SPECIFICATIONS
3.5 List of Setting Items for Ethernet Modules
The following table lists the parameter setting items that are set using Ethernet Module.
Function and parameter setting
requirement (
1
)
Parameter setting item Description of setting
MC Fixed Mail
Refer-ence
section
Ethernet module settings
Settings for using the Ethernet module as a network
module.
Section 4.6
Operational settings
Set the common items between the modules.
These settings are required for the initial processing.
Section 4.6
Set the data communication timer values.
2 2 2
Section 5.2
Initial settings
Set the DNS server’s IP address.
— —
Section 10.6
Open settings
Set up the open processing for connection in order to
perform data communication with the external device.
— Section 5.5
Router relay parameter
Set the router relay of Ethernet. Section 5.3
E-mail settings
Perform settings for sending/receiving e-mail.
— —
Send mail address
setting
Set the destination mail address.
— —
Section 10.6
: Must be set when the applicable function is used. : Set as needed : Setting is not required.
1 The meanings of the abbreviations used in the table above are as follows:
MC: Communication using MC protocol
Mail: E-mail
Fixed: Communication using the fixed buffer
2 Setting is not necessary if default values are being used.
POINT
Parameters set in FX Configurator-EN (GX-Developer) are saved in the Ethernet
module’s flash ROM.