Mitsubishi A953GOT-LBD-M3-H, Руководство по оборудованию

Страница: 29 / 142

Installation Wiring 2
2-1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
2. Installation Wiring
This section describes installation of the Handy GOT and wiring of the power supply and the
operation switches.
Thoroughly understand the specifications before performing installation and wiring.
2.1 Installation method
Cautions on installation
• Use the Handy GOT in the general specifications environment described in this manual.
Do not use the Handy GOT in a place with dusts, soot, conductive dusts, corrosive gas or
flammable gas, place exposed to high temperature, dew condensation, direct sunlight,
wind and rain, or place exposed to vibration or impact.
If the Handy GOT is used in such a place, electrical shock, fire, malfunction, product
damage or deterioration may caused.
• Never drop cutting chips and electric wire chips into the ventilation window of the Handy
GOT when you drill screw holes or perform wiring.
Otherwise, fire, failure or malfunction may be caused.
• Connect connection cables securely to the specified connectors while the power is
turned OFF.
Imperfect connection may cause malfunction or failure.
• When connecting cables, pay attention to the contents described in this section.
Especially, attach the rear cover so that PCBs inside the Handy GOT are not interfered
with connection cables.
Cautions on wiring
• Make sure to attach the rear cover to the Handy GOT before turning on the power and
starting operation after the installation or wiring work.
Otherwise, electrical shock may be caused.
• Make sure to shut down all phases of the power outside the Handy GOT before starting
the installation or wiring work.
Otherwise, electrical shock and damage of Handy GOT may be caused.
A953 HANDY GOT