Mitsubishi A953GOT-LBD-M3-H, Руководство по оборудованию

Страница: 129 / 142

A953 HANDY GOT Connection to PLC by Siemens 13
13-3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
13.3 Connection cable
The connection diagram and the connector of RS-232C cables which connect the HMI adapter
and the GOT are shown below.
1) Connection diagram
2) Used connectors and connector covers
- Connector on the side of the cable dedicated to the GOT
The connector of the cable dedicated to the GOT (F9GT-HCAB-
††
M) has the following
model name. Use a counterpart connector compatible with this connector.
17JE-23250-02 (D8A2)
25-pin D-Sub, male connector manufactured by DDK Ltd. (DDK)
The cable dedicated to the GOT (F9GT-HCAB1-
††
M) is the untied wire type.
- Port on the HMI adapter side
Use a connector compatible with the HMI adapter.
3) Caution on cable preparation
The maximum cable length varies depending on the specifications of the used PLC by
Siemens. For the details, refer to the INSTRUCTION MANUAL of the PLC by Siemens.
However, make sure that the maximum cable length does not exceed the shorter one
between the specifications of the PLC by Siemens and the value shown in the table below.
Remarks
The table below shows the point of contact of the used connectors and connector covers.
GOT side (F9GT-HCAB
†
-3M)
(
†
= none or 1)
Cable connection and signal direction
HMI adapter side
(9-pin D-Sub,
male, milli-thread
type)
Signal
name
Untied
wire color
Pin
number
Pin
number
Signal
name
CD(DCD) Blue 8 1 CD
RD(RXD) Red 4 2 TXD(SD)
SD(TXD) Black 2 3 RXD(RD)
ER(DTR) White 3 4 DTR(ER)
SG(GND) Orange 10 5 SG(GND)
DR(DSR) Green 5 6 DSR(DR)
RS(RTS) Yellow 6 7 RTS(RS)
CS(CTS) Brown 7 8 CTS(CS)
FG
(SHIELD)
Drain wire 1 9 FG
Connection destination
PLC CPU
Maximum cable
length (m)
Remarks
PLC by Siemens
6
Total of F9GT-HCAB-3M and cable prepared by user
Total of F9GT-HCAB1-3M and cable prepared by user
When F9GT-HCAB1-10M is cut
Manufacturer Address Phone No.
DDK Ltd. (DDK)
(Daimei-Fujikura Bldg.) 2-11-20, Nishigotanda,
Shinagawa-Ward, Tokyo 141-0031, Japan
(03)3494-6611
Class D grounding