Mitsubishi A953GOT-LBD-M3-H, Руководство по оборудованию

Страница: 12 / 142

A953 HANDY GOT
x
Wiring procedure
The work procedures from starting up to making ready the Handy GOT using this manual are
explained below.
Outline
Reference page
1
1.2 Product configuration 1-3
Introduces the model name expression of the Handy GOT and accessories.
1.3 Introduction of cables and screen creation software (options) and
their applications
1-4
Introduces optional products (cables and connector conversion box) and explains their easy
applications.
1.4 Part identification 1-5
Explains the name and function of switches, lamps and connectors of the Handy GOT.
1.5 Applicable versions of OS and screen creation software 1-7
Explains versions of the system program (OS) and the screen creation software which are
compatible with the Handy GOT and to be prepared.
Outline of connection
Reference page
2
2.2.1 Outline of connection 2-5
Introduces configurations in accordance with applications.
2.2.2 Cable selection 2-7
Introduces combinations of cables between the Handy GOT and the PLC.
2.2.3 Pin arrangement and signal names of cables and connectors 2-8
Explains signal names of external cables and connector conversion box.
Installation
Reference page
3
2.1 Installation method 2-1
Introduces how to fix or hold by hand the Handy GOT.
2.2.4 Connection of external cable 2-9
Explains how to let an external cable go through the cable mounting slot of the Handy GOT and
fix it with screws.
2.3 Panel face processing 2-12
Introduces cables and connector box and explains the panel cut size for cases in which the
Handy GOT is attached to and detached from the panel face.