Mitsubishi A953GOT-LBD-M3-H, Руководство по оборудованию

Страница: 36 / 142

A953 HANDY GOT Installation Wiring 2
2-8
2.2.4 Connection of external cable
This section explains how to connect an optional external cable and the Handy GOT.
1) Remove the rear cover.
Rear face of Handy GOT
a) Loosen four mounting screws, and open the rear cover.
Note:
Remove only the mounting screws. Do not remove other
seven screws provided around the edge of the Handy GOT.
If such screws are removed, the waterproof ability may be
deteriorated or the Handy GOT may fail.
When the rear cover is open
(A) Power connector (8-pin)
(B) Connector for communication/operation switch (20-pin)
(C) Mounting slot
(D) Packing
2) Connect an external cable.
a) Let an external cable go through the mounting slot (C) in the Handy GOT, and connect it
to the connectors (A) and (B).
External cable
F9GT-HCAB-
†
M:
With 25-pin D-Sub connector on one side
F9GT-HCAB1-
†
M:
With untied 20-core wires on one side
a)
Note
( D )
( C )
( A ) ( B )
W h e n l e t t i n g t h e
c a b l e g o t h r o u g h ,
m a k e e a c h c o n n e c t o r
f a c e d o w n w a r d .