Mitsubishi 00JCPU, Руководство пользователя

Страница: 182 / 542

6 - 2
: Supported, : Partly supported, : Not supported
(To the next page)
Table6.2 Function list (continued)
Item Description
CPU module
Referenc
e
1) 2) 3) 4)
Intelligent function module
switch setting
Makes settings for the intelligent function modules and interrupt
modules. (Refer to manuals of intelligent function modules and
interrupt modules for setting details.)
Section
6.10
Monitor function
Reads the status of programs and devices in the CPU module by
GX Developer. Section
6.11
Monitor condition setting
Specifies the monitoring timing of the CPU module with device
condition or step number. Section
6.11.1
Local device monitor/test
Monitors and/or tests the local devices of the specified program by
GX Developer. Section
6.11.2
External input/output forced
on/off Forcibly turns on/off the external input/output of the CPU module
by GX Developer.
*4
Section
6.11.3
Online change
Changes a device value within the specified step of a sequence
program.
*5
Section
6.12
Program monitor list
Displays the scan time and execution status of the program being
executed. Section
6.13.1
Interrupt program monitor list Displays the number of executions of interrupt programs.
Section
6.13.2
Scan time measurement
Measures the execution time of the area specified by the steps in
a program. Section
6.13.3
Sampling trace function Continuously samples the specified device data at a preset timing.
Section
6.14
Debug function from multiple
GX Developers
Enables simultaneous debugging by multiple GX Developers.
Section
6.15
Watchdog timer
Monitors operational delays caused by hardware failure or
program error of the CPU module. Section
6.16
Self-diagnostic function
Self-diagnoses the CPU module to see whether an error exists or
not. Section
6.17
Error history
Stores the result of self-diagnostics to the memory as error history
data. Section
6.18
System protection
Prevents the programs from being modified from GX Developer,
serial communication module, and Ethernet module.
*1
Section
6.19
Password registration
Prohibits writing/reading data to/from each file in the CPU module
using GX Developer. Section
6.19.1
Remote password
Prevents unauthorized access from external devices such as
serial communication module and Ethernet module.
*4 *4
Section
6.19.2
System display Monitors the system configuration using GX Developer.
Section
6.20
LED indication
Displays the operating status of the CPU module with LEDs on
the front of the module. Section
6.21
LED indication priority
Sets the priority of error messages stored in the LED display data
(SD220 to SD227) in case of an error.
LED indication can be set to non-display.
Section
6.21.2
High-speed interrupt function
Executes an interrupt program at fixed intervals of 0.2ms to 1.0ms
using the interrupt pointer (I49).
*3
Section
6.22
Interrupt from intelligent
function module Executes an interrupt program at the time of interrupt request
from the intelligent function module.
*4
Section
6.23