Mitsubishi MOTORS OUTLANDER Скачать руководство пользователя страница 82

Страница: 82 / 602

CAUTION

Do not allow any person to sit on the flipped

seat cushion, and do not place luggage on it.

The seat’s mounting fittings could bend un-

der the weight, making it impossible for the

seat to be retained on the vehicle.

NOTE

When folding the second seatback forward

once, the seat automatically switch from the

luggage area mode to the walk-in mode.

To return

1. Raise the seatback until it locks securely

into place.

2. On vehicles with the third seats, make

sure that the lever is at the walk-in mode

position.

Otherwise, move the lever to the walk-in

mode position.

3. While lifting the seat belt’s buckle (A),

gently lower the seat cushion. Make sure

that there is a hook (B) at the position

shown in the illustration.

4. Push down the seat cushion until it locks

into place.

5. Make sure the seat belt’s buckle is on the

seat cushion.

Folding the third seats (7 per-

sons)

E00403600060

To fold

1. Lower the head restraints of the third

seat to the lowest position. (Refer to

“Head restraints” on page 4-06.)

2. Pull up the strap (A), then fold the seat-

back forward.

To return

1. Pull the strap (A), then raise the seatback

until it locks securely into place.

Making a luggage area

4-09

OGFE19E1

Seats and seat belts

Содержание OUTLANDER



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды

Mitsubishi MOTORS OUTLANDER, Руководство пользователя

Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды