Mitsubishi MOTORS OUTLANDER Скачать руководство пользователя страница 283

Страница: 283 / 602

The FCM brake assist function operates at

the following vehicle speed:

Against a vehicle: Approximately

15 km/h (9 mph) to 80 km/h (50 mph).

Against a pedestrian: Approximately

15 km/h (9 mph) to 65 km/h (40 mph).

CAUTION

The brake assist function may not be trig-

gered when the brake pedal is operated in

certain ways.

Do not overly rely on the system; if your ve-

hicle is in danger of collision, take all neces-

sary collision-evading actions, such as de-

pressing the brake pedal strongly regardless

of whether the system is activated or not.

FCM braking function

E00635501335

If the system judges that there is a high risk

of your vehicle colliding with a vehicle or a

pedestrian in front, this function causes the

brakes to work moderately to encourage you

to apply the brakes.

If the system judges that a collision is un-

avoidable, it initiates emergency braking con-

trol to mitigate collision-caused damages or,

if the situation permits, to avoid a collision.

When the emergency braking control is trig-

gered, you are warned of the hazard with vis-

ual and audible alarms like with the forward

collision warning function.

Once the emergency braking has worked, you

are alerted to this by a message on the infor-

mation screen of the multi-information dis-

play.

The FCM braking function operates at the

following vehicle speed:

Against a vehicle: Approximately

5 km/h (3 mph) to 80 km/h (50 mph)

Against a pedestrian: Approximately

5 km/h (3 mph) to 65 km/h (40 mph)

CAUTION

Do not use the FCM as a normal braking.

After your vehicle has stopped following the

activation of the FCM, automatic braking is

released. As the vehicle will then start creep-

ing, be sure to depress the brake pedal to

hold the vehicle stationary.

CAUTION

When applying the brake during the auto-

matic braking condition the pedal will feel

firm.

This is not abnormal.

You can apply more pressure to the pedal to

assist in braking.

In the following situations, the system pro-

vides neither control nor alarming.

•

When a vehicle or a pedestrian suddenly

cuts in front of your vehicle.

•

When the distance from a vehicle or a pe-

destrian in front is extremely short.

•

To an oncoming vehicle.

•

When the selector lever is in the “P”

(Park) or “R” (Reverse) position.

•

When the FCM has detected a problem in

the system.

If the ASC is deactivated, the FCM braking

function will not operate. Refer to “Active

Stability Control (ASC)” on page 6-68.

The FCM may or may not detect a motorcy-

cle, bicycle or wall depending on the situa-

tion. The FCM is not designed to detect

these objects.

The forward collision warning function

and/or the FCM braking function may not

activate in the following situations.

•

When a vehicle suddenly appears just in

front of your vehicle.

•

When a vehicle cuts in front of your vehi-

cle very closely.

•

When the vehicle in front is offset to the

left or right.

Forward Collision Mitigation System (FCM)*

6-94

OGFE19E1

Starting and driving

Содержание OUTLANDER



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды

Mitsubishi MOTORS OUTLANDER, Руководство пользователя

Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды