Mitsubishi MOTORS OUTLANDER Скачать руководство пользователя страница 251

Страница: 251 / 602

NOTE

If the ignition switch is turned to the

“LOCK” position or the operation mode is

put in OFF with the selector lever in any po-

sition other than “P” (Park) position, the

message may appear on the information

screen in the multi information display.

If the message appears, shift the selector lev-

er to the “P” (Park) position while depress-

ing the brake pedal.

To start the vehicle

Depress the acceleration pedal with the selec-

tor lever in any position other than “P” (Park)

or “N” (Neutral).

The brakes are released, and the brake auto

hold indication lamp in the instrument cluster

will go off.

To turn off brake auto hold

Press the brake auto hold switch to turn brake

auto hold off. The indication lamp on the

switch goes off.

If you want to turn off the system while the

brake auto hold indication lamp is illumina-

ted, press the switch while depressing the

brake pedal.

NOTE

If the brake auto hold system is turned off

without the brake pedal being depressed, a

buzzer will sound and the message will ap-

pear on the information screen in the multi

information display.

Hill start assist*

E00628000214

The hill start assist makes it easy to start off

on a steep uphill slope by preventing the ve-

hicle from moving backwards. It keeps the

braking force for about 2 seconds when you

move your foot from the brake pedal to the

accelerator pedal.

CAUTION

Do not overly rely on the hill start assist to

prevent backwards movement of the vehicle.

Under certain circumstances, even when hill

start assist is activated, the vehicle may

move backwards if the brake pedal is not

sufficiently depressed, if the vehicle is heav-

ily loaded, or if the road is very steep or slip-

pery.

The hill start assist is not designed to keep

the vehicle stopped in place on uphill slopes

for more than 2 seconds.

When facing uphill, do not rely on using the

hill start assist to maintain a stopped position

as an alternative to depressing the brake ped-

al.

Doing so could result in an accident.

Do not turn the ignition switch to the

“LOCK” or “ACC” position or the operation

mode in ACC or OFF while the hill start as-

sist is operating. The hill start assist could

stop operating, which could result in an acci-

dent.

To operate

E00628101472

1. Stop the vehicle completely using the

brake pedal.

2. On vehicles equipped with M/T, place

the gearshift lever into the 1

position.

On vehicles equipped with A/T or CVT,

place the selector lever into the “D” po-

sition.

Hill start assist*

6-62

OGFE19E1

Starting and driving

Содержание OUTLANDER



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды

Mitsubishi MOTORS OUTLANDER, Руководство пользователя

Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды