Mitsubishi MOTORS OUTLANDER Скачать руководство пользователя страница 369

Страница: 369 / 602

NOTE

When connecting a USB device, use a con-

nection cable. Failure to use a connection ca-

ble when connecting may place undue load

on, or damage the USB connector.

Set up the device in order that no unsafe ac-

tions, such as plugging in the connection ca-

ble are taken while driving.

When inserting and removing the USB de-

vice, for safety’s sake first stop the vehicle.

Do not insert other than audio devices into

the USB port. Damage to the device or

equipment may result.

Depending on the status of the USB device,

it may take some time until the device is rec-

ognized, or playback starts.

Buttons on the product will not operate

while USB device is connected.

USB device specifications and settings may

mean that connection is not possible, or re-

sult in differences in operation or display.

Depending on audio data in the USB device,

track information may not be displayed cor-

rectly.

Depending on the status of the vehicle and

device, the iPod/iPhone may not play back

after starting the engine.

Data containing copyright information may

not play back.

This product can play back MP3, WMA, and

AAC format audio files.

Depending on the type of USB device, usage

may not be possible, or functions that can be

used may be restricted.

The recommended file system for USB

memory is FAT32.

NOTE

The maximum supported capacity for USB

memory is 32GB.

Operate the USB device containing recorded

audio files while connected to this product.

Play Back of Audio Files on a

USB Device

Press the MEDIA key to set

USB as the source. The selected source is in-

dicated on the display.

Select the Track (File)

Press the

key or

key to select the

track.

This enables selection of the next or previous

track.

Fast Forward or Rewind

Hold down the 3 key or the 4 key.

Fast forward/rewind is possible.

Switch Playback Mode

Repeat playback, random playback, and scan

playback are possible.

Repeat Playback (RPT)

Press the 1RPT key.

Repeat playback of the track currently being

played.

NOTE

Pressing again will cancel.

Selecting a file will cancel this.

Folder Repeat Playback

Hold down the 1RPT key.

Repeat playback of the tracks within the fold-

er currently being played.

NOTE

Pressing again will cancel.

Even if the file is selected, folder repeat

playback will not be cancelled.

Folder

Random

Playback

(RDM)

Press the 2RDM key.

Play tracks in the folder currently being

played in a random order.

Listen to Audio Files on a USB Device

7-34

OGFE19E1

For pleasant driving

Содержание OUTLANDER



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды

Mitsubishi MOTORS OUTLANDER, Руководство пользователя

Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды