Mitsubishi MOTORS OUTLANDER Скачать руководство пользователя страница 368

Страница: 368 / 602

Play tracks in the category currently being

played in a random order.

NOTE

Pressing again will cancel.

Album Shuffle Playback

Hold down the 2RDM key.

Play back the album in a random order

(tracks in any order on the album).

NOTE

Pressing again will cancel.

Search Tracks

Search categories or track names, and select a

track.

1. Turn the /SEL key to select the cate-

gory.

2. Press the

/SEL key. Categories or

tracks within the selected category are

displayed.

3. Turn the /SEL key to select the cate-

gory or track.

4. Press the /SEL key.

Repeat steps 1 to 4, and search for

tracks.

Select the track, and press the /SEL

key to play.

NOTE

While the category (1

level) is selected,

press the 6

key to cancel track search

mode.

If there is no operation for 10 seconds after

selecting the category, then track search

mode will be cancelled.

Select the category, and hold down the

/SEL key to start playback from the first

track in that category.

While the track is selected, press the 6

key to return to the previous operation.

While the track is selected, hold down the 6

key to cancel track search mode.

If there is no operation for five seconds after

selecting the track, that file is played back.

iPod operations such as selecting a track will

cancel track search mode.

Listen to Audio Files on a

USB Device

E00736501245

By connecting commercially-available USB

devices such as USB memory to this product,

you can play back audio files on these

through the product.

CAUTION

Do not leave the USB device unattended in

the vehicle.

Never hold these devices in your hand to op-

erate while driving, as this is dangerous.

Do not use hard discs, card readers, or mem-

ory readers, as damage may occur to these or

to the data contained therein. If these are er-

roneously connected, then turn the ignition

switch to the “LOCK” position or put the

operation mode in OFF, then remove.

Because of the risk of data loss, it is recom-

mended that files be backed up.

No guarantee is made as regards damage to

the USB device, nor regarding loss or dam-

age to data contained therein.

Depending on how the devices are handled,

audio files being damaged or lost, therefore

it is recommended that data be backed up.

NOTE

Digital audio players that support the mass

storage class specifications can be connec-

ted.

For details regarding the types of USB devi-

ces that can be connected and the types of

files that can be played back in vehicles with

a Bluetooth

2.0 interface), refer to “ Types

of connectable devices and supported file

specifications” on page 7-72.

Regarding how to connect USB devices, re-

fer to “How to connect a USB memory de-

vice” on page 7-70.

Listen to Audio Files on a USB Device

7-33

OGFE19E1

For pleasant driving

Содержание OUTLANDER



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды

Mitsubishi MOTORS OUTLANDER, Руководство пользователя

Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды