Mitsubishi MOTORS OUTLANDER Скачать руководство пользователя страница 366

Страница: 366 / 602

Folder Repeat Playback

Hold down the 1RPT key.

Repeat playback of the tracks within the fold-

er currently being played.

NOTE

Pressing again will cancel.

Even if the file is selected, folder repeat

playback will not be cancelled.

Random Playback (RDM)

Press the 2RDM key.

Play the tracks in the folder in a random or-

der.

NOTE

Pressing again will cancel.

Folder Random Playback

Hold down the 2RDM key.

Play all tracks in folders on the disc in a ran-

dom order.

NOTE

Pressing again will cancel.

Scan Playback (SCAN)

Press the SCAN key.

Play the first 10 seconds of each of the tracks

in the folder currently being played in order.

Search Tracks

Search folders and files, and select a track.

1. Turn the /SEL key to select the folder.

2. Press the /SEL key.

Files within the selected folder are dis-

played.

3. Turn the /SEL key to select the file.

4. Press the /SEL key.

This plays the selected file (track).

NOTE

While the folder is selected, press the 6

key to cancel track search mode.

If there is no operation for 10 seconds after

selecting the folder, then track search mode

will be cancelled.

NOTE

Select the folder, and hold down the /SEL

key to start playback from the first track in

that folder.

While the file is selected, press the 6

key

to return to the previous operation.

While the file is selected, hold down the 6

key to cancel track search mode.

If there is no operation for five seconds after

selecting the file, that file is played back.

Disc operations such as selecting a track will

cancel track search mode.

Listen to an iPod

E00738001185

By connecting commercially-available iPod/

iPhone devices to this product, you can play

back tracks on these through the product.

CAUTION

Do not leave the iPod/iPhone unattended in

the vehicle.

Never hold these devices in your hand to op-

erate while driving, as this is dangerous.

No indemnification for data loss resulting

when the iPod/iPhone is connected to the

product will be possible.

Depending on how the devices are handled,

audio files being damaged or lost, therefore

it is recommended that data be backed up.

Listen to an iPod

7-31

OGFE19E1

For pleasant driving

Содержание OUTLANDER



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды

Mitsubishi MOTORS OUTLANDER, Руководство пользователя

Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды