Mitsubishi MOTORS OUTLANDER Скачать руководство пользователя страница 110

Страница: 110 / 602

WARNING

Do not put a hanger or any heavy or poin-

ted object on the coat hook. If the curtain

airbag was activated, any such item could

be propelled away with great force and

could prevent the curtain airbag from in-

flating correctly. Hang clothes directly on

the coat hook (without using a hanger).

Make sure there are no heavy or sharp

objects in the pockets of clothes that you

hang on the coat hook.

Do not allow a child to lean against or

close to the front door even if the child is

seated in a child restraint system.

The child’s head should also not lean

against or be close to the area where the

side airbag and curtain airbag are loca-

ted. It is dangerous if the side airbag and

curtain airbag inflate.

Failure to follow all of these instructions

could lead to serious or fatal injury to the

child.

WARNING

We recommend work around and on the

side airbags and curtain airbags system to

be done by a MITSUBISHI MOTORS

Authorized Service Point.

SRS warning lamp/display

E00407802787

Type 1

Type 2

There is a Supplemental Restraint System

(“SRS”) warning lamp on the instrument

panel. The system checks itself every time

the ignition switch is turned to the “ON” po-

sition or the operation mode is put in ON.

The SRS warning lamp will come on for sev-

eral seconds and then go out. This is normal

and means the system is working properly.

If there is a problem involving one or more of

the SRS components, the warning lamp will

come on and stay on. At the same time, the

warning display will appear on the informa-

tion screen in the multi information display

(Type 1 only).

The SRS warning lamp is shared by the SRS

airbag system and the seat belt pretensioner

system.

WARNING

If any of the following conditions occur,

there may be a problem with the SRS air-

bags and/or seat belt pretensioners, and

they may not function properly in a colli-

sion or may suddenly activate without a

collision:

•

Even when the ignition switch or the

operation mode is in ON, the SRS

warning lamp does not come on or it

remains on.

•

The SRS warning lamp and/or the

warning display comes on while driv-

ing.

The SRS airbags and seat belt pretension-

ers are designed to help reduce the risk of

serious injury or death in certain colli-

sions. If either of the above conditions oc-

curs, immediately have your vehicle

checked by a MITSUBISHI MOTORS

Authorized Service Point.

Supplemental restraint system (SRS) - airbag

4-37

OGFE19E1

Seats and seat belts

Содержание OUTLANDER



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды

Mitsubishi MOTORS OUTLANDER, Руководство пользователя

Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды