Mitsubishi MOTORS OUTLANDER Скачать руководство пользователя страница 275

Страница: 275 / 602

NOTE

Even if the ACC is in the activated state

when the ignition switch or operation mode

is set to “OFF”, the system does not auto-

matically become activated when the igni-

tion switch or operation mode is set to “ON”

next time.

To activate ACC control

With the ACC turned on (in the ‘standby

state’), push down the “SET -” switch while

driving.

When your desired speed is reached, release

the “SET -” switch; then this speed is set and

the ACC initiates the speed control to the set

speed.

The set speed is indicated on the information

screen of the multi-information display.

The ACC can be selected between approxi-

mately 40 km/h (25 mph) to 180 km/h

(112 mph).

You can set and initiate the speed control

when driving at approximately 10-40 km/h

(6-25 mph) while a vehicle in front is being

detected. In this case, the target speed is set

to 40 km/h (25 mph). Setting to any speed

outside this range does not cause the ACC to

start the control.

When the ACC is initialized, a buzzer sound

is heard and the “SET” indicator lights up on

the screen. At the same time, the display

showing the following distance setting and

the running-ahead vehicle symbol (only when

the ACC is detecting a vehicle in front) is

switched to the in-control mode display.

NOTE

The ACC cannot start the control when any

of the following conditions is present. You

are alerted to this state by a sounding buzzer.

•

When the vehicle speed is lower than ap-

proximately 10 km/h (6 mph) or 180 km/h

(112 mph) or higher.

•

When the vehicle is running at a speed be-

tween approximately 10 and 40 km/h and

the ACC is not detecting any vehicle in

front.

•

When the ASC is in the OFF state.

•

When ABS, ASC or TCL is working.

Adaptive Cruise Control System (ACC)*

6-86

OGFE19E1

Starting and driving

Содержание OUTLANDER



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды

Mitsubishi MOTORS OUTLANDER, Руководство пользователя

Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды