Mitsubishi MOTORS OUTLANDER Скачать руководство пользователя страница 432

Страница: 432 / 602

6. Examine the radiator hoses for coolant

leakage and the drive belt for looseness

or damage.

If there is anything wrong with the cool-

ing system or drive belt, we recommend

you to have it checked and repaired.

Tools and jack

E00800901382

Storage

The tools and jack are stowed on the right

side of the luggage area.

The storage location of the tools and jack

should be remembered in case of an emer-

gency.

1. Tools

2. Jack

Tools

1. Jack bar

2. Wheel nut wrench

Jack

The jack is used only for the purpose of

changing a tyre when a tyre is punctured.

NOTE

The jack is maintenance-free.

The jack is in conformity with EC law as ap-

proximated by the Machinery Directive

2006/42/EC.

The EC declaration of conformity is attached

to the section “Declaration of Conformity”

in the end of this owner’s manual.

NOTE

•

The business name, full address of the

manufacturer and of his authorised repre-

sentative and the designation of the jack

are described in the EC declaration of

conformity.

To remove

1. Remove the jack lid.

2. Retract the jack and remove it from its

installation fitting (A).

To retract

To store

1. Retract the jack, then return it to its orig-

inal position.

Tools and jack

8-13

OGFE19E1

For emergencies

Содержание OUTLANDER



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды

Mitsubishi MOTORS OUTLANDER, Руководство пользователя

Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды