Mitsubishi MOTORS OUTLANDER, Руководство пользователя

Страница: 278 / 602

NOTE
l
The set speed indication on the display turns
to “---” when the accelerator pedal is de-
pressed. This indication remains as long as
the pedal is in a depressed position.
l
In certain conditions, the braking control and
alarming functions of the ACC may not
work for a short while after releasing the ac-
celerator pedal.
l
Set speed adjustment is impossible while the
accelerator pedal is in a depressed position.
To terminate ACC control
E00638200189
To cancel of ACC control
You can cancel the ACC control by using ei-
ther of the methods below.
When the control is cancelled, the system is
placed in the ‘standby state’. You can make
the system restart the control by using the
“SET -” or “RES +” switch if the conditions
for activating the control are met.
l
Press the “CANCEL” switch.
l
Depress the brake pedal.
NOTE
l
You can also cancel the ACC control by
pressing the “ACC ON/OFF” switch. If this
switch is pressed, the ACC is turned off.
When the system shifts into the ‘standby
state’ as a result of cancellation of the ACC
control, the “SET” indicator goes out. At the
same time, the display of the following dis-
tance setting and running-ahead vehicle sym-
bol (only when the ACC is detecting a vehi-
cle) is placed in the standby state of display.
The ACC control is automatically cancelled
and the ACC is placed in the ‘standby’ state
in any of the situations listed below; you are
alerted to this condition by the sound of a
buzzer and a message on the display. You can
make the system restart the control by using
the “SET -” or “RES +” switch if the condi-
tions for resuming the control are reestablish-
ed.
l
When your vehicle stops as the vehicle
in front stops.
l
When ASC is turned off.
l
When ABS, ASC or TCL is in operation.
Adaptive Cruise Control System (ACC)*
6-89
OGFE19E1
Starting and driving
6