Mitsubishi MOTORS OUTLANDER Скачать руководство пользователя страница 54

Страница: 54 / 602

NOTE

The tailgate cannot be opened when the bat-

tery is flat or disconnected.

If you want to open the tailgate, it can be

opened by using the inside tailgate release.

Refer to “Inside tailgate release” on page

3-32.

To close

Pull the tailgate grip (B) downward as illus-

trated. Gently shut the tailgate from the out-

side so that it is completely closed. Always

ensure the tailgate is securely closed.

CAUTION

When closing the tailgate, always ensure

your or other person’s fingers cannot be

caught by the tailgate.

NOTE

Gas struts (C) are installed to support the

tailgate.

To prevent damage or faulty operation.

•

Do not hold the gas struts and wires when

closing the tailgate.

•

Also, do not push or pull the gas struts.

•

Do not attach any plastic material, tape,

etc., to the gas struts.

•

Do not tie string, etc., around the gas

struts.

•

Do not hang any object on the gas struts.

Electric tailgate*

E00312800012

Before operating the electric tailgate, unlock

the tailgate by using the keyless entry system,

keyless operation system, or the central door

locks.

Refer to “Keyless entry system” on page

3-04, “Keyless operation system*” on page

3-08, or “Central door locks” on page 3-21.

Operating the electric tailgate

E00312901111

WARNING

The luggage area was not designed for

people to ride in it. Do not let your chil-

dren ride in or play in the luggage area.

Riding or playing in the luggage area

could result in a serious accident.

Before driving, make sure the electric tail-

gate is securely closed.

If you drive with the tailgate open, there is

a danger of exhaust gas entering the vehi-

cle and causing carbon monoxide poison-

ing.

For safety’s sake, the electric tailgate

should be operated by adults and not chil-

dren.

When opening and closing the tailgate,

make sure that there are no people nearby

and be careful not to hit your head or

pinch your hands, neck, etc.

Make sure the electric tailgate is com-

pletely open before loading and unloading

luggage.

Electric tailgate*

3-25

OGFE19E1

Locking and unlocking

Содержание OUTLANDER



























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды

Mitsubishi MOTORS OUTLANDER, Руководство пользователя

Результаты поиска

Содержание OUTLANDER

Отзывы:

Похожие инструкции для OUTLANDER

Бренды по названию

Популярные бренды