Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Руководство пользователя

Страница: 78 / 535

(77,1)
[ Edit: 2021/ 2/ 10 Model: DG-D ]
not illuminated (indicating that the airbag might
inflate in a crash), it could be that the child
restraint or seat belt is not being used properly.
Make sure that the child restraint is installed
properly, the seat belt is used properly and the
occupant is positioned properly. If the front
passenger airbag status light is not illuminated,
reposition the occupant or child restraint in a
rear seat.
If the front passenger airbag status light will not
illuminate even though you believe that the
child restraint, the seat belts and the occupant
are properly positioned, it is recommended that
you take your vehicle to an authorized
Mitsubishi Motors dealer. A authorized
Mitsubishi Motors dealer can check the system
status by using a special tool. However, until
you have confirmed with your dealer that your
airbag is working properly, reposition the
occupant or child restraint in a rear seat.
The Advanced Airbag System and front pas-
senger airbag status light will take a few
seconds to register a change in the passenger
seat status. This is normal system operation and
does not indicate a malfunction.
If a malfunction occurs in the front passenger
airbag system, the SRS airbag warning light
, located in the meters and gauges area, will
illuminate. Have the system checked. It is
recommended you visit an authorized
Mitsubishi Motors dealer for this service.
Normal operation:
In order for the occupant classification sensor
system to classify the front passenger based on
weight, please follow the precautions and steps
outlined below:
Precautions:
.
Make sure that there are no objects weigh-
ing over 9.1 lb (4 kg) hanging on the seat or
placed in the seatback pockets.
. Make sure that a child restraint or other
object is not pressing against the rear of the
seatback.
.
Make sure that a rear passenger is not
pushing or pulling on the back of the front
passenger seat.
. Make sure that the front passenger seat or
seatback is not forced back against an object
on the seat or floor behind it.
.
Make sure that there is no object placed
under the front passenger seat.
. Make sure that the front passenger seat head
restraint does not contact the roof when
adjusting the front passenger seat.
Steps:
1. Adjust the seat as outlined. (See “Seats”
(P.1-2).) Sit upright, leaning against the
seatback, and centered on the seat cushion
with your feet comfortably extended to the
floor.
2. Make sure there are no objects on your lap.
3. Fasten the seat belt as outlined. (See “Seat
belts” (P.1-16).) Front passenger seat belt
buckle status is monitored by the occupant
classification system, and is used as an
input to determine occupancy status. So, it
is highly recommended that the front
passenger fasten their seat belt.
4. Remain in this position for 30 seconds
allowing the system to classify the front
passenger before the vehicle is put into
motion.
5. Ensure proper classification by checking the
front passenger airbag status light.
NOTE:
This vehicle’s occupant classification sensor
system locks the classification during driving
so it is important that you confirm that the
front passenger is properly classified prior to
driving. Also, the occupant classification
sensor system may recalculate the weight of
the occupant under some conditions (both
while driving and when stopped), so the front
Safety — Seats, seat belts and supplemental restraint system
1-59
Condition: