Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Руководство пользователя

Страница: 355 / 535

(354,1)
[ Edit: 2021/ 2/ 10 Model: DG-D ]
5-104
Starting and driving
on the system to prevent accidents or to
control the vehicle’s speed in emergency
situations. Do not use the ACC system
except in appropriate road and traffic
conditions.
ACC system operation
The ACC system is designed to maintain a
selected distance from the vehicle in front of
you and can reduce the speed to match a slower
vehicle ahead. The system decelerates the
vehicle as necessary and if the vehicle ahead
comes to a stop, the vehicle decelerates to a
standstill. However, the ACC system can only
apply up to 40% of the vehicle’s total braking
power.
This system should only be used when traffic
conditions allow vehicle speeds to remain fairly
constant or when vehicle speeds change gradu-
ally. If a vehicle moves into the traveling lane
ahead or if a vehicle traveling ahead rapidly
decelerates, the distance between vehicles may
become closer because the ACC system cannot
decelerate the vehicle quickly enough. If this
occurs, the ACC system sounds a warning
chime and blinks the system display to notify
the driver to take necessary action.
The ACC system cancels and a warning chime
sounds if the speed is below approximately 15
MPH (25 km/h) and a vehicle is not detected
ahead. For MI-PILOT Assist with Navi-link
equipped vehicles on a limited access freeway
as identified in the navigation map data, the
ACC system cancels and a warning chime
sounds if your vehicle is at a standstill for more
than approximately 3 seconds and a vehicle is
not detected ahead.
The ACC system operates as follows:
. When there are no vehicles traveling ahead,
the ACC system maintains the speed set by
the driver. The vehicle set speed range is
between approximately 20 and 90 MPH (30
and 144 km/h).
.
When there is a vehicle traveling ahead, the
ACC system adjusts the speed to maintain
the distance, selected by the driver, from the
vehicle ahead. If the vehicle ahead comes to
a stop, the vehicle decelerates to a standstill.
Once your vehicle stops, the ACC system
keeps the vehicle stopped.
. When the vehicle traveling ahead moves to
a different traveling lane, the ACC system
accelerates and maintains vehicle speed up
to the set speed.
The ACC system does not control vehicle speed
or warn you when you approach stationary and
slow moving vehicles. You must pay attention
to vehicle operation to maintain proper distance
from vehicles ahead when approaching toll
gates or traffic congestion.
SSD0254
When driving on the highway at a vehicle set
speed and approaching a slower traveling
vehicle ahead, the ACC system adjusts the
speed to maintain the distance, selected by the
driver, from the vehicle ahead. If the vehicle
ahead changes lanes or exits the highway, the
ACC system accelerates and maintains the
vehicle set speed. Pay attention to the driving
operation to maintain control of the vehicle as it
accelerates to the set speed.
The vehicle may not maintain the set speed on
winding or hilly roads. If this occurs, you will
have to manually control the vehicle speed.
Normally when controlling the distance to a
vehicle ahead, the system automatically accel-
erates or decelerates your vehicle according to
Condition: