Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Руководство пользователя

Страница: 357 / 535

(356,1)
[ Edit: 2021/ 2/ 10 Model: DG-D ]
5-106
Starting and driving
When the ACC system detects a vehicle ahead,
the vehicle ahead detection indicator and the
speed control status indicator (distance control
mode) illuminates in green.
*: The design of the set display may differ
depending on the model.
Vehicle ahead stops:
When a vehicle ahead is detected and it
gradually decelerates to stop, your vehicle
decelerates to a standstill. When your vehicle
is at a standstill, the “(RES+) Follow Vehicle
Ahead” message is displayed on the multi-
information display.
Vehicle ahead accelerates:
. When your vehicle is stopped for less than
approximately 3 seconds and the vehicle
ahead begins to move, your vehicle will
start moving again automatically.
.
When your vehicle is at a standstill for more
than approximately 3 seconds and the
vehicle ahead begins to accelerate, push
up the RES+ switch or lightly depress the
accelerator pedal. The ACC system starts to
follow the vehicle ahead.
.
Always check surroundings before restart-
ing the vehicle.
. For vehicles equipped with MI-PILOT
Assist with Navi-link and only when on a
limited access freeway (as identified in the
navigation map data):
— The time the vehicle can remain stopped
and automatically restart is extended
from 3 seconds to 30 seconds.
— If a vehicle ahead cuts in or out of the
lane ahead, the vehicle may not auto-
matically start when the traffic ahead
begins to move. You need to push up the
RES+ switch or lightly depress the
accelerator pedal to follow the vehicle
directly ahead when it is safe to do so.
Vehicle ahead not detected:
When a vehicle is no longer detected ahead, the
ACC system gradually accelerates your vehicle
to resume the previously vehicle set speed. The
ACC system then maintains the vehicle set
speed.
When a vehicle is no longer detected, the
vehicle ahead detection indicator and speed
control status indicator (maintain speed control
mode) turn off.
The ACC system gradually accelerates to the
vehicle set speed, but you can depress the
accelerator pedal to quickly accelerate. When a
vehicle is no longer detected and your vehicle is
traveling under approximately 15 MPH (25
km/h), the ACC system automatically cancels.
For MI-PILOT Assist with Navi-link equipped
vehicles on a limited access freeway as
identified in the navigation map data, the
ACC system cancels and a warning chime
sounds if your vehicle is at a standstill for more
than approximately 3 seconds and a vehicle is
not detected ahead.
Condition: