Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Руководство пользователя

Страница: 155 / 535

(154,1)
[ Edit: 2021/ 2/ 10 Model: DG-D ]
2-62
Instruments and controls
The front and rear (if so equipped) seats are
warmed by built-in heaters. The switches are
located on the instrument panel and the back of
the center console box and can be operated
independently of each other.
OPERATION WITH SWITCH
1. Start the engine.
2. Push the heated seat switch and select the
desired heat range.
.
For high heat, push the switch once.
.
For medium heat, push the switch twice.
.
For low heat, push the switch three
times.
. The indicator light on the switch will
illuminate depending on the heat level
when the heater is on.
3. To turn off the heater, push the heated seat
switch until the indicator light turns off.
The heater is controlled by a control
module, automatically turning the heater
on and off.
The indicator light will remain on as long as
the switch is on.
When the vehicle’s interior is warmed, or
before you leave the vehicle, be sure to turn
off the seat heater.
The Rear Seat Alert system functions under
certain conditions to indicate there may be an
object or passenger in the rear seat(s). Check the
seat(s) before exiting the vehicle.
The Rear Seat Alert system is initially disabled.
The driver can enable the system using the
multi-information display. For additional infor-
mation, see “Vehicle Settings” (P.2-26).
When the system is enabled:
.
The system is activated when a rear door is
opened and closed within 10 minutes of the
vehicle being driven. When the vehicle is
started and the system is activated, a visual
message appears in the multi-information
display. For additional information, see “37.
Rear Seat Alert is Activated” (P.2-37).
. If a rear door is opened and closed but the
vehicle is not driven within approximately
10 minutes, the system will not be activated.
A rear door must be opened and closed and
the vehicle is driven within 10 minutes for
the system to activate.
When the Rear Seat Alert system is activated
and a driver exits the vehicle after arriving at a
destination:
.
When the driver puts the vehicle in the P
(Park) position, a message appears in the
multi-information display for the driver to
“Dismiss Message” or “Disable Alert” if
desired.
.
With the system enabled, when the driver
exits the vehicle, an audible alert (horn
sound) will occur unless a rear door is
opened and closed within a short time to
deactivate the alert.
.
If the doors are locked before the alert is
deactivated by opening a rear door, the horn
will sound.
. If the system is activated but the liftgate is
opened before opening a rear door, the horn
will be delayed until after the liftgate is
closed.
. If the audible horn alert occurs, a message
will also appear in the multi-information
display that states, “Check Rear Seat”. For
additional information, see “38. Check Rear
Seat” (P.2-38).
WARNING
.
If the driver selects “Disable Alert”, no
audible alert will be provided regardless of
rear door open/close status.
.
There may be times when there is an object
or passenger in the rear seat(s) but the
audible alert does not sound. For example,
this may occur if rear seat passengers enter
or exit the vehicle during a trip.
.
The system does not directly detect objects
or passengers in the rear seat(s). Instead, it
REAR SEAT ALERT
Condition: