Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Руководство пользователя

Страница: 211 / 535

(210,1)
[ Edit: 2021/ 2/ 10 Model: DG-D ]
3-36
Pre-driving checks and adjustments
WAD0141X
Remote control type:
The door mirror remote control operates when
the ignition switch is in the ACC or ON
position.
To fold the door mirrors, push the door mirror
folding switch
. To unfold, push the switch
again.
The mirrors automatically retract or extend
when the doors are locked or unlocked using the
key buttons or the F.A.S.T.-key operation. This
function can be deactivated. See an authorized
Mitsubishi Motors dealer for details.
If mirrors are manually operated or bumped, the
mirror body can become loose at the pivot
point. To correct electronic mirror operation,
cycle the mirrors by pushing the door mirror
folding switch until the mirrors are in the open
position.
NOTE:
. Be careful not to get your hands trapped
while a mirror is moving.
.
If you move a mirror by hand or it moves
after hitting a person or object, you may
not be able to return it to its original
position using the door mirror folding
switch. If this happens, push the door
mirror folding switch to place the mirror
in its folded position and then push the
switch again to return the mirror to its
original position.
. When freezing has occurred and mirrors
fail to operate as intended, please refrain
from repeated pushing of the door mirror
folding switch as this action can result in
burn-out of the mirror motor circuits.
Folding and unfolding the mirrors
without using the door mirror fold-
ing switch (automatic extension
function)
Functions can be modified as stated below.
Please consult an authorized Mitsubishi Motors
dealer.
.
The outside mirrors automatically fold
when the ignition switch is placed in the
OFF position, and unfold when the ignition
switch is placed in the ON position.
. The auto fold feature for the outside mirrors
is disabled.
Reverse auto tilt function (if so
equipped)
When backing up the vehicle, the right or left
door mirrors will turn downward automatically
to provide better rear visibility.
1. Place the ignition switch in the ON position.
2. Move the shift lever to the R (Reverse)
position.
3. Choose the right or left door mirror by
operating the door mirror control switch.
4. The door mirror surface moves downward.
The door mirror surface can be adjusted and
stored when the reverse auto tilt function is
activated. (See “Adjusting door mirrors ” (P.3-
35).)
When one of the following conditions has
occurred, the door mirror surfaces will return
to their original positions.
.
Push the right or left door mirror control
switch again.
Condition: