Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Руководство пользователя

Страница: 195 / 535

(194,1)
[ Edit: 2021/ 2/ 10 Model: DG-D ]
3-20
Pre-driving checks and adjustments
WAD0165X
1. Pull the hood lock release handle located
below the driver’s side instrument panel;
the hood springs up slightly.
2. Push the lever underneath the front of the
hood upwards as illustrated with your
fingertips.
3. Raise the hood.
4. Remove the support rod and insert it into
the slot .
Hold the coated part when removing or
resetting the support rod. Avoid direct
contact with the metal parts, as they may
be hot immediately after the engine has been
stopped.
When closing the hood:
1. While supporting the hood, return the
support rod to its original position.
2. Slowly lower the hood to about 8 to 12 in
(20 to 30 cm) approximately the hood lock,
then let it drop.
3. Make sure it is securely latched.
WARNING
.
Always be sure the liftgate has been closed
securely to prevent it from opening while
driving.
.
Do not drive with the liftgate open. This
could allow dangerous exhaust gases to be
drawn into the vehicle. For additional
information, refer to “Exhaust gas (carbon
monoxide)” (P.5-5).
.
To help avoid risk of injury or death
through unintended operation of the vehi-
cle and or its systems, including entrap-
ment in windows or inadvertent door lock
activation, do not leave children, people
who require the assistance of others or pets
unattended in your vehicle. Additionally,
the temperature inside a closed vehicle on
a warm day can quickly become high
enough to cause a significant risk of injury
or death to people and pets.
.
Always be sure that hands and feet are
clear of the door frame to avoid injury
while closing the liftgate.
.
When there is a build up of snow or ice, it
should be removed before opening the
liftgate. If you open the liftgate without
removing it, there is a possibility that the
liftgate may close suddenly due to the
weight of that snow or ice.
LIFTGATE
Condition: