Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Руководство пользователя

Страница: 385 / 535

(384,1)
[ Edit: 2021/ 2/ 10 Model: DG-D ]
5-134
Starting and driving
.
Do not attach metallic objects near the radar
sensor area (brush guard, etc.). This could
cause failure or malfunction.
. Do not place reflective materials, such as
white paper or a mirror, on the instrument
panel. The reflection of sunlight may
adversely affect the camera unit’s detection
capability.
. Do not alter, remove or paint the front of the
vehicle near the sensor area. Before custo-
mizing or restoring the sensor area, it is
recommended that you visit an authorized
Mitsubishi Motors dealer.
Radio frequency statement
For USA
Type approval number:
FCC ID: NF3–FR5CPEC
User Manual statement according to §15.19:
This device complies with Part 15 of the FCC
Rules.
Operation is subject to the following two
conditions:
1. this device may not cause harmful inter-
ference, and
2. this device must accept any interference
received, including interference that may
cause undesired operation.
User Manual statement according to §15.21:
Changes or modifications made to this equip-
ment not expressly approved by Robert BOSCH
GmbH may void the FCC authorization to
operate this equipment.
User Manual statement according to §15.105:
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful inter-
ference to radio communications. Operation of
this equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the interference
at his own expense.
R F E x p o s u r e I n f o r m a t i o n a c c o r d i n g
2.1091/2.1093/OET bulletin 65:
Radiofrequency radiation exposure information:
This equipment complies with FCC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be in-
stalled and operated with minimum distance of
20 cm between the radiator and your body.
The transmitter must not be co-located or
operating in conjunction with any other antenna
or transmitter.
For Canada
Type approval number:
IC: 3387A-FR5CPEC
Legal warning for RF equipment:
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this
device may not cause interference, and (2) this
device must accept any interference, including
interference that may cause undesired operation
of the device.
Le présent appareil est conforme aux CNR
d’Industrie Canada applicables aux appareils
radio exempts de licence. L’exploitation est
autorisée aux deux conditions suivantes: (1)
l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre
le fonctionnement.
Condition: