Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Руководство пользователя

Страница: 213 / 535

(212,1)
[ Edit: 2021/ 2/ 10 Model: DG-D ]
3-38
Pre-driving checks and adjustments
WAD0142X
MEMORY STORAGE FUNC-
TION
Two positions for the driver’s seat and door
mirrors can be stored in the personal memory.
Follow these procedures to use the memory
system.
1. Adjust the driver’s seat and door mirrors to
the desired positions by manually operating
each adjusting switch. For additional in-
formation, refer to “Seats” (P.1-2) and
“Door mirrors” (P.3-34).
2. Push the SET switch and, within 5 seconds,
push the memory switch (1 or 2).
3. The indicator light for the pushed memory
switch will come on and stay on for
approximately 5 seconds.
4. The chime will sound if the memory has
been stored.
NOTE:
If a new memory position is stored in the
same memory switch, the previous memory
position will be overwritten by the new
stored position.
Confirming memory storage
Push the SET switch. If a memory position has
not been stored in the switch (1 or 2) the
indicator light for the respective switch will
come ON for approximately 0.5 seconds. If a
memory position has been stored in the switch
(1 or 2) then the indicator light for the
respective switch will stay ON for approxi-
mately 5 seconds.
Recalling switch memory positions
To recall the manually stored positions, push the
memory switch (1 or 2). The driver’s seat and
the door mirrors will move to the positions
stored in the memory switch.
Linking log-in function to a stored
memory position (models with navi-
gation system)
The log-in function can be linked to a stored
memory position with the following procedure.
1. Place the ignition switch in the ON position
while carrying the F.A.S.T.-key that was
registered to the vehicle with a log-in
function.
NOTE:
Make sure the F.A.S.T.-key is far apart.
Otherwise, the vehicle may detect the
wrong F.A.S.T.-key.
2. Adjust the position of the driver’s seat and
door mirrors. (See “Seats” (P.1-2) and
“Door mirrors” (P.3-34).)
3. Place the ignition switch in the OFF
position.
The next time you log in (selecting the user on
the display) after placing the ignition switch in
the ON position while carrying the F.A.S.T.-
key, the system will automatically adjust to the
memorized driving position. (See the separate
Smartphone-link Display Audio (SDA) Own-
er’s Manual.)
Condition: