Mitsubishi MOTORS OUTLANDER SPORT/RVR 2022, Руководство пользователя

Страница: 358 / 535

(357,1)
[ Edit: 2021/ 2/ 10 Model: DG-D ]
WAF0709X
When passing another vehicle, the vehicle set
speed indicator
flashes when the vehicle
speed exceeds the set speed. The vehicle ahead
detection indicator turns off when the area
ahead of the vehicle is open. When the pedal is
released, the vehicle returns to the previously
set speed. Even though your vehicle speed is set
in the ACC system, you can depress the
accelerator pedal when it is necessary to
accelerate your vehicle rapidly.
Cut-in detection
If a vehicle moves into your traveling lane near
your vehicle, the ACC system may inform the
driver by flashing the vehicle ahead detection
indicator.
Approach warning
If your vehicle comes closer to the vehicle
ahead due to rapid deceleration of that vehicle
or if another vehicle cuts in, the system warns
the driver with the chime and ACC system
display. Decelerate by depressing the brake
pedal to maintain a safe vehicle distance if:
.
The chime sounds.
.
The vehicle ahead detection indicator and
set distance indicator blink.
. You judge it necessary to maintain a safe
distance.
The warning chime may not sound in some
cases when there is a short distance between
vehicles. Some examples are:
.
When the vehicles are traveling at the same
speed and the distance between vehicles is
not changing.
. When the vehicle ahead is traveling faster
and the distance between vehicles is
increasing.
.
When a vehicle cuts in near your vehicle.
The warning chime will not sound when:
.
Your vehicle approaches other vehicles that
are parked or moving slowly.
. The accelerator pedal is depressed, over-
riding the system.
NOTE:
The approach warning chime may sound and
the system display may flash when the radar
sensor detects objects on the side of the
vehicle or on the side of the road. This may
cause the ACC system to decelerate or
accelerate the vehicle. The radar sensor
may detect these objects when the vehicle is
driven on winding, narrow, or hilly roads or
when the vehicle is entering or exiting a
curve. In these cases, you will have to
manually control the proper distance ahead
of your vehicle.
Also, the sensor sensitivity can be affected by
vehicle operation (steering maneuver or
driving position in the lane) or traffic or
vehicle conditions (for example, if a vehicle is
being driven with some damage).
Acceleration when passing
When the ACC system is engaged above 44
MPH (70 km/h) and following a slower vehicle
(below the set vehicle speed), and the turn
signal is activated to the left, the ACC system
will automatically start to accelerate the vehicle
to help initiate passing on the left and will begin
Starting and driving
5-107
Condition: