Mitsubishi Electric PAC-SIF051B-E Скачать руководство пользователя страница 25

Страница: 25 / 64

4.11 Using SD memory card

FTC is equipped with an SD memory card interface.

Using an SD memory card can simplify main remote controller settings and can

store operating logs. *1

(a) For insertion, push on the SD memory card until it clicks into place.

(b) For ejection, push on the SD memory card until it clicks.

Note: To avoid cutting fingers, do not touch sharp edges of the SD

memory card connector (CN108) on the FTC control board.

Logos

Capacities

2 GB to 32 GB *2

SD speed classes

All

• The SD Logo is a trademark of SD-3C, LLC.

The mini

SD logo is a trademark of SD-3C, LLC.

The micro SD logo is a trademark of SD-3C, LLC.

*1 To edit main remote controller settings or to check operating data, an Ecodan

service tool (for use with PC) is required.

*2 A 2-GB SD memory card stores up to 30 days of operation logs.

<Handling precautions>

(1) Use an SD memory card that complies with the SD standards. Check that the

SD memory card has a logo on it of those shown to the right.

(2) SD memory cards to the SD standards include SD, SDHC, mini

SD, micro SD,

and micro SDHC memory cards. The capacities are available up to 32 GB.

Choose that with a maximum allowable temperature of 55ºC.

(3) When the SD memory card is a mini SD, mini SDHC, micro SD, or micro SDHC

memory card, use an SD memory card converter adapter.

(4) Before writing to the SD memory card, release the write-protect switch.

(5) Before inserting or ejecting an SD memory card, make sure to power off the

system. If an SD memory card is inserted or ejected with the system powered

on, the stored data could be corrupted or the SD memory card be damaged.

* An SD memory card is live for a whilst after the system is powered off. Before

insertion or ejection wait until the LED lamps on the FTC control board are all

off.

(6) The read and write operations have been verified using the following SD mem

ory cards, however, these operations are not always guaranteed as the speci-

fications of these SD memory cards could change.

Manufacturer Model

Tested in

Verbatim

#44015

Mar. 2012

SanDisk

SDSDB-002G-B35

Oct. 2011

Panasonic

RP-SDP04GE1K

Oct. 2011

Arvato

2GB PS8032 TSB 24nm MLC

Jun. 2012

Arvato

2GB PS8035 TSB A19nm MLC Jul. 2014

SanDisk

SDSDUN-008G-G46

Oct. 2016

Verbatim

#43961

Oct. 2016

Verbatim

#44018

Oct. 2016

VANTASTEK

VSDHC08

Sep. 2017

Before using a new SD memory card (including the card that comes with the

unit), always check that the SD memory card can be safely read and written to

by the FTC controller.

a) Check for correct wiring of power supply to the system. For more details,

refer to section 4.1.

(Do not power on the system at this point.)

b) Insert an SD memory card.

c) Power on the system.

d) The LED4 lamp lights if the read and write operations are successfully

completed. If the LED4 lamp continues blinking or does not light, the SD

memory card cannot be read or written to by the FTC controller.

(7) Make sure to follow the instruction and the requirement of the SD memory

card’s manufacturer.

(8) Format the SD memory card if determined unreadable in step (6). This could

make it readable.

Download an SD card formatter from the following site.

SD Association homepage: https://www.sdcard.org/home/

(9) FTC supports FAT file system but not NTFS file system.

(10) Mitsubishi Electric is not liable for any damages, in whole or in part, including

failure of writing to an SD memory card, and corruption and loss of the saved

data, or the like. Back up saved data as necessary.

(11) Do not touch any electronic parts on the FTC control board when inserting or

ejecting an SD memory card, or else the control board could fail.

4. Electrical work

(a)

(b)

FTC (Main)

FTC (Sub)

(a)

(b)

Содержание PAC-SIF051B-E

































































Результаты поиска

Содержание PAC-SIF051B-E

Отзывы:

Похожие инструкции для PAC-SIF051B-E

Бренды по названию

Популярные бренды

Mitsubishi Electric PAC-SIF051B-E, Руководство по установке

Результаты поиска

Содержание PAC-SIF051B-E

Отзывы:

Похожие инструкции для PAC-SIF051B-E

Бренды по названию

Популярные бренды