Mitsubishi Electric MELSEC iQ-R Series, Руководство по программированию

Страница: 1730 / 2110

1728
21 A/D CONVERSION INSTRUCTIONS
21.2 Reading the User Range Setting Values
■
Control data
• For R60AD4, R60ADH4
Set only the save data type setting (s)+2. A data write to an area to be set by the system does not result in a normal read of
the offset/gain setting values.
Operand: (s)
Device Item Description Setting range Set by
+0 System area
  
+1 Completion status The instruction completion status is stored.
• 0: Completed successfully
• Other than 0: Completed with an error (error code)

System
+2 Save data type setting Specifies which one of the voltage and current is read as the
offset/gain setting value.
• 0: Voltage specification
• 1: Current specification
0000H to 000FH User
+3 System area
  
+4 CH1 Factory default setting offset value (L)
 
System
+5 CH1 Factory default setting offset value (H)   System
+6 CH1 Factory default setting gain value (L)   System
+7 CH1 Factory default setting gain value (H)
 
System
+8 CH2 Factory default setting offset value (L)
 
System
+9 CH2 Factory default setting offset value (H)   System
+10 CH2 Factory default setting gain value (L)   System
+11 CH2 Factory default setting gain value (H)
 
System
+12 CH3 Factory default setting offset value (L)
 
System
+13 CH3 Factory default setting offset value (H)   System
+14 CH3 Factory default setting gain value (L)   System
+15 CH3 Factory default setting gain value (H)
 
System
+16 CH4 Factory default setting offset value (L)
 
System
+17 CH4 Factory default setting offset value (H)   System
+18 CH4 Factory default setting gain value (L)   System
+19 CH4 Factory default setting gain value (H)
 
System
+20 CH1 User range setting offset value (L)
 
System
+21 CH1 User range setting offset value (H)   System
+22 CH1 User range setting gain value (L)   System
+23 CH1 User range setting gain value (H)
 
System
+24 CH2 User range setting offset value (L)
 
System
+25 CH2 User range setting offset value (H)   System
+26 CH2 User range setting gain value (L)   System
+27 CH2 User range setting gain value (H)
 
System
+28 CH3 User range setting offset value (L)
 
System
+29 CH3 User range setting offset value (H)   System
+30 CH3 User range setting gain value (L)   System
+31 CH3 User range setting gain value (H)
 
System
+32 CH4 User range setting offset value (L)
 
System
+33 CH4 User range setting offset value (H)   System
+34 CH4 User range setting gain value (L)
 
System
+35 CH4 User range setting gain value (H)
 
System
b15 b3 b2 b1 b0
0
…
CH4 CH3 CH2 CH1