Mitsubishi Electric MELSEC iQ-R Series, Руководство по программированию

Страница: 1514 / 2110

1512
15 NETWORK COMMON INSTRUCTIONS
15.1 Link Dedicated Instructions
■
Applicable devices
*1 FX and FY cannot be used.
*2 FD cannot be used.
*3 T, ST, C, and FD cannot be used.
The REQ instruction cannot be executed when the target station is ACPU.
■
Control data
Operand Bit Word Double word Indirect
specification
Constant Others
X, Y, M, L,
SM, F, B,
SB, FX, FY J  \  T, ST, C, D, W,
SD, SW, FD,
R, ZR, RD U  \G  , J  \  ,
U3E  \(H)G 
Z LT, LST,
LC LZ K, H E $ J U
(J/U) J(P).REQ
            
G(P).RE
Q
            
(s1)   
*2
         
(s2)   
*2
         
(d1)
  
*2
         
(d2)

*1
 
*3
         
Operand: (s1)
Device Item Description Setting range Set by
+0 Error completion type
(1) Error completion type (bit 7)
Specify whether to set data when completed with an error.
• 0: Do not set data in (s1)+11 and later at completion with an error.
• 1: Set data in (s1)+11 and later at completion with an error.
0011H
0091H User
+1 Completion status The completion status is stored upon completion of the instruction.
• 0: Normal
• Other than 0: Error (error code)

System
+2 Own station channel Specify the channel to be used by own station. (

Page 1450 Range of available
channel numbers)
1 to 8, 11 to 18 User
+3 Target station CPU type Specify the CPU type of the target station.
• 0000H: Addressed to target station CPU (control CPU)
• 03D0H: Addressed to control system CPU
• 03D1H: Addressed to standby system CPU
• 03D2H: Addressed to system A CPU
• 03D3H: Addressed to system B CPU
• 03E0H: Addressed to multiple CPU No. 1
• 03E1H: Addressed to multiple CPU No. 2
• 03E2H: Addressed to multiple CPU No. 3
• 03E3H: Addressed to multiple CPU No. 4
• 03FFH: Addressed to target station CPU (control CPU)
0000H
03D0H to 03D3H
03E0H to 03E3H
03FFH User
+4 Target network number Specify the network number of the target station.
• 1 to 239: Network number
1 to 239 User
+5 Target station number Specify the station number of the target station.
(1) Station number specification
[Ethernet or CC-Link IE Controller Network]
• 1 to 120: Station number
[CC-Link IE Field Network]
• 125: Master station
• 126: Master operating station
• 1 to 120: Local station, intelligent device station, submaster station
(2) Group number specification
[Ethernet or CC-Link IE Controller Network]
0081H to 00A0H: All stations with group numbers 0001H to 0020H
(Can be specified for remote RUN/STOP)
(3) All-station specification
00FFH: All stations of target network number (broadcast (excluding the own station))
(Can be specified for remote RUN/STOP)
1 to 120,
125, 126,
0081H to 00A0H,
00FFH User
+6 Not used
  
b15
0 0 (1) 1 0 1
b7 b0 b4
… … …