Mitsubishi Electric MELSEC iQ-R C R12CCPU-V, Руководство пользователя

Страница: 69 / 262

4 BASIC FUNCTIONS
4.12 RAS Function
67
4
Method for clearing error
The following shows how to clear errors.
■ Using CW Configurator
Clear errors with the module diagnostic function of CW Configurator. (

CW Configurator Operating Manual)
■
Using user programs
1.
Check the continuation error detected by the C Controller module dedicated function (CCPU_GetErrInfo).
2.
Clear the cause of the currently detected continuation errors.
3.
Execute the C Controller module dedicated function (CCPU_ClearError).
Precautions
• Since this function clears all the detected continuation errors at once, unintended errors may also get cleared.
• This function does not remove the cleared errors from the event history.
• Any errors occurred in a module other than the C Controller module cannot be cleared by this function.
1157H Receive buffer securement error
1165H UDP/IP send failed
1166H TCP/IP send failed
1167H Unsend data send error
1200H, 1210H Module moderate error
1220H Another CPU module moderate error
1240H, 1241H Inter-module synchronization processing error
1260H, 1262H Multiple CPU synchronization processing error
1830H Receive queue full
1831H Receive processing error
1832H Transient data error
1840H Memory card error
1843H Internal buttery failure
1846H Refresh cycle exceeded
2120H, 2121H Memory card error
2400H, 2401H Module verification error
2420H Fuse blown error
2441H, 2442H Module major error
2450H Detection of module major error
2461H, 2462H Another CPU module major error
2470H Another CPU module major error
2610H Inter-module synchronization signal error
2630H Multiple CPU synchronization signal error
Error code Error name