Mitsubishi Electric Melsec A Series, Руководство пользователя

Страница: 97 / 150

84
Table 6.1 Error Code List for AnNCPU (Continue)
Error
Message
Error
Code
(D9008)
CPU
States
Error and Cause Corrective Action
"MISSING
END INS."
(Checked at
STOP
→
RUN)
12 Stop
(1) There is no END
( FEND ) instruction in
the program.
(2) When subprogram has
been set by the
parameter, there is no
END instruction in
the subprogram.
Write END instruction
at the end of program.
"CAN’T
EXECUTE(P)
" (Checked at
the
execution of
instruction)
13 Stop (1) There is no jump
destination or multiple
destinations specified by
the CJ , SCJ ,
CALL , CALLP , or
JMP instruction.
(2) There is a CHG
instruction and no
setting of subprogram.
(3) Although there is no
CALL instruction, the
RET instruction
exists in the program
and has been executed.
(4) The CJ , SCJ ,
CALL , CALL P , or
JMP instruction has
been executed with its
jump destination located
below the END
instruction.
Read the error step by use
of peripheral equipment and
correct the program at that
step.
(Insert a jump destination or
reduce multiple destinations
to one.