Mitsubishi Electric Melsec A Series, Руководство пользователя

Страница: 124 / 150

111
6.3 Error Code List for AnUCPU
The causes and corrective actions for error code, error message and detailed error
with AnUCPU are shown below.
*1 denotes those error codes that occur only with the AnUCPU.
*2 denotes those error codes that occur only with the A4UCPU.
Table 6.3 Error Code List for AnUCPU
Error
Massage
Error
Code
(D9008)
Detailed
Error
Code
(D9091)
CPU
States
Error and Cause Corrective Action
101 Instruction codes which
the CPU cannot
decode are included in
the program. (1) Read the error step
using a peripheral
device and correct
the program of the
step.
(2) Check the ROM if it
contains instruction
codes which cannot
be decoded. If it
does, replace it with
a correct ROM.
102 Index qualification is
specified for a 32-bit
constant.
103 Device specified by a
dedicated instruction is
not correct.
104 An dedicated
instruction has
incorrect program
structure.
105 An dedicated
instruction has
incorrect command
name.
"INSTRCT
CODE
ERR"
(Checked
when
STOP
→
RUN or at
execution
of
instruction.)
10
106
STOP
Index qualification
using Z or V is included
in the program
between
LEDA/B IX
and LEDA/B IXEND .
Read the error step
using a peripheral
device and correct the
program of the step.