Mitsubishi Electric Melsec A Series, Руководство пользователя

Страница: 139 / 150

126
Table 6.3 Error Code List for AnUCPU
Error
Massage
Error
Code
(D9008)
Detailed
Error
Code
(D9091)
CPU
States
Error and Cause Corrective Action
461 Module specified by the
FROM / TO
instruction is not a
special function
module.
Read the error step
using a peripheral
device and check and
correct contents of the
FROM / TO
instruction of the step.
"SP.UNIT
ERROR"
(Checked
at
execution
of the
FROM/TO
instruction
or the
dedicated
instructions
for special
function
modules.)
46
462
Stop or
Continu
e (set
by
parame
ter)
(1) Module specified by
the dedicated
instruction for
special function
module is not a
special function
module or not a
corresponding
special function
module.
(2) A command was
issued to a CC-Link
module with function
version under B.
(3) A CC-Link
dedicated command
was issued to a
CC-Link module for
which the network
parameters have
not been set.
(1) Read the error step
using a peripheral
device and check
and correct contents
of the dedicated
instruction for special
function modules of
the step.
(2) Replace with a
CC-Link module
having function
version B and above.
(3) Set the parameters.